!!!{{{EIS_XSTUDY}}}
[{TableOfContents}]
!!About
The {{{eis_xstudy}}} routine is actually a component of the EIS Planning Tool, and is used in both the construction of a timeline ({{{eis_mk_plan}}}) — to load something from the OSDB (official studies database) — and in {{{eis_mk_study}}}, used to select a study for modification in your own personal database before submission to the OSDB.

To look at the OSDB, ensure that you have already run the command

{{{print,fix_zdbase(/eis)}}}

to instruct the planning tool to read from the OSDB.
%%information To look at your personal database instead (where you keep studies that you're designing) just replace {{{/eis}}} with {{{/user}}} in the above line.%%

!!Walk-through

!The {{{eis_xstudy}}} interface

Below is an example of the widget that appears in SolarSoft when you type {{{eis_xstudy}}}:
[{Image src='EIS_XSTUDY.png'}]

!Study list
The top panel contains a list of all the studies in the database.
I've cheated a little bit, in the sense that I've already scrolled down the list in the upper panel and chosen Study ID #267, the catchily-named {{{JS_CH_140x256p}}}

At the top of this widget there are two black triangular arrows. These can be used to reduce (down arrow) or increase (up arrow) the number of lines shown in the study list. (This can be especially useful if your screen is a lot smaller than the default widget size.) This looks like so:

[{Image src='EIS_XSTUDY_shrunk.png'}]

There's also a button at the top of the widget marked ''View/Edit Study Description''. I'll come back to that in a while.

!Information bar
In the status bar immediately beneath the study list is a sort of information bar: here you can see important information such as the amount of data that the study is expected to generate in kbits (this is approximate, since compression factors vary a little from dataset to dataset), the duration in hours minutes and seconds (fixed, but with a little margin added), and the consequent rate of telemetry from EIS to the Hinode Data Recorder (DR).

The volume here is probably one of the most important factors, since it determines how many times (if any!) a study can be run during an OP Period — see [SbandObservingInfo] for what this means in practice.

!Study description area
Below this information bar, there's a text area that contains the ''Study Description''. This is information which the study author has included, indicating what they originally intended the study to be used for

%%information One of the nice things about EIS is that you can recycle a study already designed by someone else for a similar — or even different — purpose, without having to go through this design step.%%

To read the study description in full, either scroll down this panel with the scroll bar, or go the the button at the top marked ''View/Edit Study Description'' (I told you I'd come back to it). This opens up a window like this:
[{Image src='Viewing_Study_Description.png' }]

As you can see, the study contains information for the person using this study, if it is to be used for the original proposal. 

There is also often information in the study description added by the study validator, the person who tests the study on the EIS demonstration model at MSSL, before it enters the OSDB. This information can include things like ''warnings'' — ''e.g.'', information about how not to use the study — and so on.

To get rid of this window, just click on ''Quit''.

!Search methods
If you have some idea about the study you're looking for, ''e.g.'' it has ''EL'' in the name, or it was written by George Doschek, you can use the search facility to save you time.

Below the Study Description panel, you can search on one or more fields, namely ''Acronym'' (the name of the study), ''Title'' (confusingly, a description of the study), or ''Author'' (self-explanatory). Since I've mentioned George Doschek, let's try a search for studies he's designed. I don't know any other Doscheks on the EIS team, so I'll just use his surname:
[{Image src='Search_Doschek.png' }]

You can see that this results in four studies showing up, each of which was authored by someone called Doschek.

You can clear the search fields by clicking ''Clear'' on the right-hand side.

Changing the ''Study Type'' drop-down list on the right from ''Science & Engineering'' to ''Science'' excludes all engineering-type studies from our search (although this tends to be more useful when looking for specifice engineerings studies hidden amongst the forest of science studies).

!Raster panel

Below the search area is the ''Raster'' panel, where you can start to look at the details of the study's execution. Let's take another example to look at this.

For the purposes of this example, my memory's a bit shaky, so I just remember that the study I'm interested in has the letters ''CH'' in the acronym. Searching for these letters in the ''Acronym'' field produces these results:
[{Image src='Search_CH_sample.png'}]
and I recognise the study I'm interested in: PRY_CH_density. I then click on that study in the list, to highlight it. 

This also makes the raster panel go from being empty to showing the rasters in the selected study (if no study is highlighted, {{{eis_xstudy}}} can't know which rasters to display).

A study is essentially a package: it's an observing programme that contains a pre-defined order of executable rasters. {{{eis_xstudy}}} allows you to look inside this package, at the rasters that a study contains, as well as the details of those rasters. You'll see that Study #268 {{{PRY_CH_density}}} contains raster ID #257 {{{CH_density}}}. In most practical cases, studies contain only one raster. But the study is what is actually makes it onto the ''timeline'' (schedule) for EIS.

%%information It's important not to confuse raster and study IDs when requesting observations. Please always use the __Study ID or full study acronym__.%%

!Viewing raster details
If we want to see what happens when {{{PRY_CH_density}}} runs, the best thing to do from here is to click on each raster in the raster panel (in this case, there's only one), and then click the ''View Selected Raster Details...'' button just above.

This opens up a separate window which details how the raster will execute on-board the space-craft (only omitting pointing details, which are flexible). The window should look something like this:
[{Image src='Raster_details_CH_density2.png'}]

This is also a two-panel window. The reason for that is that, similar to the way that a study can't exist without a raster, a raster can't exist without a line list. More on that later...

The upper panel here shows the key information that we need to know about to describe the raster, namely:

||Parameter Name||value
|Title| ''to be discussed later''
|Author|Peter Young
|Raster Type|Scanning
|Slit/Slot|2"
|Compression|DPCM
|Window Height|200 pixels
|Number of Raster Pointings|34
|FM Step Size|2.0"
|Number of Exposures/step|1
|Exposure time(s) in seconds|100.0
|Delay times (ms)|0.0

So, what to do with all this information? Let's put it in context.

__Author__\\
The author of this ''raster'' is Peter Young. Fairly easy

__Raster Type__\\
The term [raster|http://en.wikipedia.org/wiki/Raster_graphics] usually conjures up the idea of a rectangular image. And that's what EIS does when it makes its observations. It's just that in some cases the ''X'' dimension is time, rather than space.

EIS has two modes of raster. The first is ''scanning'' raster, which is what we see in this example. EIS takes a restricted-field image of the Sun and then disperses it, perpendicular to the length of the slit. Then, a fine mirror (FMIR) adjusts the X position on the Sun where that image comes from (by the amount indicated in ''FM Step size'') and makes another image. This is how EIS builds up [spectroheliograms|http://en.wiktionary.org/wiki/spectroheliogram] (spectral image of the Sun).

The second mode is the so-called ''fixed slit'' or ''sit'n'stare'' raster type, whereby the same slit or slot-size portion of the Sun is repeatedly made into an image and dispersed. This is qualitatively the same as the scanning raster, except for the fact that we are usually more interested in the time-dependent changes at a particular location.

__Slit/Slot__\\
''a.k.a. SLA — SLit/slot Assembly''\\
EIS makes images of different widths every time it takes an exposure (and disperses it). Slit spectra contain direct spectroscopic information, but take time to build up information over areas (see ''Raster Type'' above). To make slit spectra, EIS uses two slits: 1" and 2" in width. 

The 1" slit has less spatial coverage (because it is narrower) so there is sharper spectral resolution; meanwhile, the advantage of the 2" slit is that it is twice as wide, and  thus it can accumulate photons twice as quickly as the 1" slit. (Note that this argument does not extend linearly to the width of the slots).
 
For more image-based information, at the expense of line profile information, we can make slot images (scanning or sit'n'stare). In both cases the images are dispersed on the detector. The slot images are a sort of convolution of a spectrum with an image. However, the narrow slot — 40" wide — has been chosen so that essentially monochromatic images of the Sun can be made in many lines, without significant blending with images made in nearby lines. 

The width of the wider slot — 266" — was chosen for ground calibration reasons, rather than scientific considerations. However, the Fe XV line at 284 Å is sufficiently removed from other active region lines that we can essentially make images of only Fe XV in bright coronal loops. In other lines, the images resemble the ''overlappograms'' produced by the ''Skylab'' S020 spectrograph (see Figure 2 of [http://solar.physics.montana.edu/reiser/] for a full-Sun idea of what this means), though with smaller spatial extent.

__Compression Type__\\
In order to make the process of transferring data to the ground more efficient, data from all Hinode instruments can be compressed on-board the spacecraft by the mission data processor or ''MDP''.

The MDP allows several choices of compression:
%%sortable
||Scheme||Compression Type
|Uncompressed|None
|[DPCM|~DPCMScheme]|Lossless
|[JPEG98|~JPEG98Scheme]|lossy (Q factor 98)
|[JPEG95|~JPEG95Scheme]|lossy (Q factor 95)
|[JPEG92|~JPEG92Scheme]|lossy (Q factor 92)
|[JPEG90|~JPEG90Scheme]|lossy (Q factor 90)
|[JPEG85|~JPEG85Scheme]|lossy (Q factor 85)
|[JPEG75|~JPEG75Scheme]|lossy (Q factor 75)
|[JPEG65|~JPEG65Scheme]|lossy (Q factor 65)
|[JPEG50|~JPEG50Scheme]|lossy (Q factor 50)
%%
%%information The links in the above table each take you to a page where the estimates of the Data Compression (''DC'') factor are listed. These values vary depending on the target and SLA choice. They will be updated from time-to-time until the team are satisfied that they are adequate enough for planning purposes.%%

In addition to these webpages showing the more involved analysis results, the current values used for DC factors in making observations are stored in {{{$SSW/hinode/eis/idl/spacecraft/decompression/eis_get_compression_factor.pro}}}


__Window Height__\\
Whereas the width of each spectral window can vary (see Line Lists below), the height of the image ''y%%sub size%%'' read out from the CCDs is necessarily fixed for each window. So each raster has the same height in all spectral windows. This height is expressed in arcseconds. 

__Number of Raster Pointings__\\
''Scanning raster-specific''\\
This is a little confusing, but it tells you the number of times ''N'' that the mirror must move between observations to build up a scanning raster, i.e. 1 less than the number of positions at which EIS makes an exposure.

__Working out the size of a raster__\\
If ''N+1'' is the number of positions at which the slit makes an image, Σ ''t%%sub exp%%'' is the sum of the exposure times (usually there is only one) at each position (in seconds), and ''x%%sub step%%'' is the size (in arcseconds) of the step, then it takes ''n'' × Σ ''t%%sub exp%%'' × ''x%%sub step%%'' seconds to build up a spatial image of an area that is ''x%%sub size%%'' = ( (''n'' × ''x%%sub step%%'') + SlitSize ) arcseconds across.

Putting this together with the ''x%%sub size%%'', worked out above, tells you the spatial extent of the observation that this raster produces.


__Exposure Times__\\
To tailor observations for more than one

__Delay Times__\\


__Raster Title__\\
You can also get a quick idea of most of the characteristics of a raster from the single-string raster ''Title'' field in {{{eis_xstudy}}}.

%%information Note that since engineering studies are created by hand, rather than through the planning tool, it's not normally possible to view their contents (such as number of exposures, or exposure time) in the Raster panel.%%